DTF Supply

DTF Supplies for Daily Production

Clogged nozzles at noon ruin the whole run. Grainy powder trashes shirts. You’re not here for excuses. You’re here for DTF Printing Supplies that behave. Direct-to-Film printing depends on pigment ink that stays in suspension, powder that melts at 320°F, and cleaner that won’t wreck your seals. Here’s what DTF West Coast offers: White and CMYK ink, Hot Melt Glue Powder, and AlbaChem VLR 1020. All tested on i3200 heads. No bad batches. No guesswork.

Pick Your Bottles: Inks, Powder, and Cleanup

Choose White Ink for High Opacity and No Head Clogs

Low-sediment, 18–22% solids, 0.2 micron grind. Built for i3200 heads with auto circulation. Prints L* 94 white on black in one pass. Sale price $35.00 per liter, regular $40.00. Shake daily. Keep 65–77°F. Shops at 300 shirts/day use about 6 liters every 3–4 weeks.

Pick Black Ink for Deep Darks and Clean Shadows

High-density K channel, Dmax 1.75. Gives you true blacks and smooth grays. ICC matched to our white so colors stay balanced. Sale price $35.00 per liter, regular $40.00. Runs about 1 liter for every 3 liters of white.

Select Cyan Ink for True Blues and Accurate Skin Tones

Lightfast, pigment-based. Stays blue under heat, no green shift. Critical for logos and photos. Sale price $35.00 per liter, regular $40.00. Usage is roughly 0.8 liters per 3 liters of white. Cap it tight.

Grab Magenta Ink for Vivid Reds and Stable Purples

Real magenta that holds saturation after 50 washes at 105°F. If your reds turn orange, it’s your magenta. Sale price $35.00 per liter, regular $40.00. Magenta and yellow run close to 1:1, about 1 liter per 2,800 sq ft.

Get Yellow Ink for Bright Color With No Fade

Clean Y channel, no green cast. UV stable so it won’t tan in sunlight. Sale price $35.00 per liter, regular $40.00. Yellow rarely clogs, but shows banding first when humidity drops under 40% RH.

Stock Hot Melt Glue Powder for Soft Hand and Strong Bond

TPU, 80–170 micron medium grain. Melts 230–320°F. Bonds cotton, poly, and blends without a crunchy feel. One 1kg bag covers 22–25 meters of 24” film. Sale price $35.00, regular $42.00. Seal it. Moisture turns it to a brick.

Use AlbaChem VLR 1020 Cleanup for Heads and Capping Stations

Cuts cured ink and adhesive from i3200, XP600, and 4720 setups. Won’t swell EPDM seals. Sale price $28.00, regular $32.00. Spray, wait 20 seconds, wipe. One bottle lasts 4–6 weeks in a busy shop.

Why Printers Trust DTF West Coast

Anyone can ship ink. But when it settles in two hours, you pay the price.

We batch-test everything. White ink gets a 72-hour vial test. Drop more than 4mm and it fails. You never see that bottle. Powder gets checked for melt point and grain. Too fine and it floats in your shaker. Too coarse and shirts feel like sandpaper.

VLR 1020 is the cleaner we run in our own shop. If it ate seals, we’d know. It doesn’t.

And stock is real. DTF West Coast holds 400+ liters of white and 900 kg of powder in Texas. Order by 1 pm CT and it ships today. No “on the water” delays. No backorders.

Specs That Keep Heads Working Through The Years

Forget marketing sheets. Here’s what matters:

1. Solids percent. White needs 18–22%. Less and you double-pass. More and it clogs.

2. Settling time. Good white stays mixed 8 hours. Bad white separates in 2 hours and drops nozzles.

3. Profiles. No ICC means your colors drift. We include profiles for Maintop, Flexi, and Cadlink.

4. Grain range. 80–200 micron powder runs clean. Outside that, you get clouds or grit.

5. Cleaner chemistry. Generic solvent kills seals. VLR 1020 is built for DTF and UV.

One sentence: Buy supplies that protect your heads, not just your wallet.

Shop Routine That Prevents Downtime

Morning: Shake white 30 seconds. Nozzle check. Light clean only if needed. Check room: 45–60% RH, 68–77°F.

During work: Run auto-circulation every 15 minutes. Keep lids on.

Shutdown: Wet cap with VLR 1020 or OEM fluid. Don’t let heads dry. One dry night costs you the next morning.

Weekly: Wipe rails, clean encoder strip with alcohol, inspect wiper. Ten minutes saves a $350 head.

That’s it. Do that and i3200 heads last 8–11 months. Skip it and you’ll buy heads every 6 weeks.

How to Build Your Inventory With DTF West Coast

Easy.

1. Check your shelf. White under 20%? Order now.

2. Match your heads. Our ink is tuned for i3200 and 4720. XP600? Call us first.

3. Bundle it. Add powder and VLR 1020. Over $99 ships free UPS Ground. Over $249 gets 2-Day Air upgrade.

4. Auto-ship. Use 6+ liters of white monthly? Set it for every 3 weeks. Get 5% off and never run out.

5. Store smart. Ink cool and dark. Powder sealed with desiccant. Cleaner capped tight.

Orders by 1 pm CT ship same day. Tracking by 6 pm. Bottle shows up damaged? We overnight a replacement.

Keep heads printing and powder flowing. 

Order White Ink, CMYK, Hot Melt Glue Powder, and AlbaChem VLR 1020 from DTF West Coast now. Same-day shipping by 1 pm CT. Your printer runs better with the right supplies.

Frequently Asked Questions

How Long Does DTF West Coast White Ink Last After Opening?

Use it within 90 days. Keep it 65–77°F and out of sun. Shake daily. If it smells sour or separates and won’t remix, don’t run it. DTF West Coast date-codes every bottle and rotates stock weekly so you get fresh ink, not old inventory that clogs heads.

What Grain Size Is DTF West Coast Hot Melt Glue Powder?

It’s 80–170 micron, medium grain TPU. That range melts 230–320°F and gives a soft hand on cotton and blends. Finer powder blows around and makes a mess. Coarser powder feels rough. DTF West Coast tested this size on 24” and 60cm shaker systems.

Can I Mix DTF West Coast Ink With Other Brands?

Don’t mix brands. Different resins can gel or separate and clog dampers. Finish the old ink, flush with cleaning solution, then load DTF West Coast ink. We’ve seen shops lose three heads in a week from mixing. It’s not worth saving a few dollars.

Is AlbaChem VLR 1020 Safe on Epson i3200 Heads?

Yes. VLR 1020 is formulated for DTF and UV printers. It dissolves cured ink and adhesive without swelling EPDM seals. Don’t flood heads. Spray on a swab or drip into the cap. DTF West Coast runs it daily on Platonink machines with i3200 heads.

How Much Powder Do I Use Per Square Foot?

Plan 1 kg per 22–25 meters of 24” film. That’s about 236 sq ft. At $35 per kg, cost is $0.148 per sq ft. Heavy coverage uses more. Light coverage uses less. DTF West Coast powder shakes off clean so you don’t over-apply if your shaker is tuned.

Why Does My White Ink Look Thin From DTF West Coast?

Three checks: shake it, warm it, profile it. Cold white is thick and prints light. No ICC means your RIP is guessing. White must be 72°F and you need our profile loaded. DTF West Coast white is 18–22% solids, so opacity is there if setup is right.

Does DTF West Coast Include ICC Profiles With Ink?

Yes. We supply profiles for Maintop, FlexiPRINT, Cadlink, and Ekko RIP. They’re built for i3200 heads on 75-micron film. Install it, set your ink limits, and colors stay consistent. If your shop humidity is extreme, we’ll adjust a custom profile for you.

How Should I Store DTF West Coast Ink?

Keep it 65–77°F, no sunlight, caps tight. White settles, so shake daily. Unopened, it’s good 12 months from lot date. Opened, use in 90 days. DTF West Coast ships fresh and rotates inventory, but heat and sun will kill any ink fast. Treat it right.

What Is the Shelf Life of Opened Powder From DTF West Coast?

Ninety days if sealed with desiccant and kept under 60% RH. Humidity is the enemy. If powder clumps or won’t flow, toss it. DTF West Coast ships in moisture-barrier bags. If a bag arrives hard, we replace it. Don’t run clumpy powder through your shaker.

How Fast Will DTF West Coast Ship My Supply Order?

Orders by 1 pm CT ship same business day from Texas. UPS Ground is 1–4 days. Over $99 ships free. Need it urgent? Pick 2-Day Air. DTF West Coast stocks 400+ liters of white and 900 kg of powder so you don’t wait on restocks.